What happened

Vitals, a Mac activity monitor that groups processes by app, released version 1.10 this week. The developer announcement, published on November 6, 2026, says the update "lets you run your Mac's fans" for the first time. Earlier versions showed temperatures and fan speeds. Version 1.10 lets you set them.

Temperature and Fans is now its own tab, in the main window and in the menu bar dropdown. It shows CPU temperature, GPU temperature, the hottest sensor, and the fastest fan at the top, and it offers three ways to run the fans:

  • Automatic. macOS runs the fans, as before.
  • Fixed. Each fan gets a slider. The fan goes to that speed and stays there through restarts and sleep.
  • Curve. Fan speed follows a temperature you choose: the CPU, the GPU, the hottest sensor, or the battery on a laptop.

The curve starts from two presets. Quiet keeps the fans at their slowest until 60 C, then speeds them up to full by 90 C. Cool moves air from the start and reaches full speed by 82 C. Drag any point and the preset becomes your own curve.

Two rules can switch the curve for you. Quiet on Battery applies the Quiet curve while the Mac runs on battery. Cool While Apps Work Hard applies the Cool curve while an app you pick, such as Xcode during a build, keeps the Mac busy, and it lets go a minute after that app calms down. A separate Max option runs the fans at full speed for 5, 15, or 30 minutes, or until a hard-working app finishes.

Fan control is off until you turn it on. The first time, you click Turn On Fan Control and allow Vitals once in System Settings, under General and Login Items. It uses the same helper as the app's Full System Metrics feature.

Vitals 1.10 works on Macs with fans, on Apple silicon and Intel, running macOS 15 Sequoia or later. The developer says it was tested on an M2 Max, and that other Macs use the same controls. A MacBook Air has no fans, so there the tab is called Temperature and shows sensors only. The update is free for everyone who owns Vitals.

Sources: Vitals 1.10 announcement by its developer, Vitals fan control guide, Vitals official site

What it means for your Mac's thermals

A monitoring app crossing into fan control does not change how your Mac cools itself. macOS still decides the fan speed by default, and macOS still protects the chip if heat keeps rising. What changes is the number of tools asking for the same job, and that raises the same questions you should ask of any fan app, including Smart Breeze.

The first question is what happens at the limit. Vitals states its limits plainly. It keeps each fan within the speeds that Mac allows for it. Above 95 C, the fans run at full speed whatever the curve says. If macOS reports the Mac running very hot, Vitals hands the fans back to macOS. When Vitals quits, macOS takes over again straight away. Bounded speeds plus automatic handback is the pattern to look for in any fan control app. Our guide to whether custom Mac fan curves are safe explains how to judge that pattern before you install anything.

The second question is which temperature drives the curve. Vitals lets a curve follow the CPU, the GPU, the hottest sensor, or the battery. That choice matters more than the shape of the curve. A curve tied only to the CPU can stay quiet while the GPU heats up during a game or an export. A curve tied to the hottest sensor reacts sooner, at the cost of more noise from short spikes. Our guide to choosing a fan curve sensor walks through how to pick the right sensor for the work you do.

The two presets also show the basic trade-off in every fan curve. Quiet accepts a hotter Mac first in exchange for silence, which is why its fans stay at their slowest until 60 C. Cool spends noise early to keep peak temperatures lower. Neither preset makes the chip produce less heat. A curve only changes when the heat leaves, and how loud that feels. Our guide to Mac fan curves covers how to set that trade-off on purpose instead of copying a preset.

One limit is worth naming. Vitals needs macOS 15 or later, so Macs that cannot run Sequoia get monitoring from other tools but not this one. And because the developer tested fan control on one Mac model, an M2 Max, treat the first days on a different model as a check: confirm the fans follow the curve, confirm they return to Automatic when the app quits, and only then rely on it.

Practical takeaways

  • Run only one fan control app at a time. Two apps writing fan targets at once will fight each other, and the result is neither app's curve.
  • Start on Automatic and watch the new Fans tab for a day. Learn what your Mac's temperatures and fan speeds look like under your normal work before you set a fixed speed or a curve.
  • Pick the curve sensor for the job. Use the hottest sensor for mixed CPU and GPU work, and expect a CPU-only curve to miss GPU heat.
  • Test the handback. Quit the app while a curve is active and confirm the fans return to macOS control. That handback is the safety feature you will rely on most.
  • Use Max before a long build or export, not during the hottest part of it. Starting cool delays the point where the Mac has to slow itself down.
  • Keep the preset names honest. Quiet will run hotter, and Cool will run louder. Choose per job, not once for everything.

Official sources

Sources

Smart Breeze documents its safety limits and handback to macOS, so you can compare any fan app against the same checks. Download Smart Breeze